BCM 50 w/ PRI Video Conferencing

[CTCINY]

Is it possible with a BCM50 R2.0 to run video conferencing through a PRI? If it is can someone give me a starting point because I honestly have no idea. I thought it was only able to be done with BRI? Thanks.

What doesn't kill you only makes you stronger.

If it's true that our species is alone in the universe, then I'd have to say that the universe aimed rather low and settled for very little.---George Carlin

 

[cook1082]

You do need a BRI card to assing the spids-target to. do you have the room for more / expantion.

 

[CTCINY]

No we do not. Would it be possible though if we had a BRI card?

What doesn't kill you only makes you stronger.

If it's true that our species is alone in the universe, then I'd have to say that the universe aimed rather low and settled for very little.---George Carlin

 

[FLFones]

You might lose your PRI card then, right?

 

[pandster]

Not sure exactly what you are trying to do but we have a BCM50 R3 with 2 externsion modules. One is a PRI connecting to our Telco and the other is the Quad BRI module which is working in S-bus mode which give us internal ISDN BRI's which we use for ISDN dataconnections to banks etc but would equally well work for an ISDN VC unit as long as you were not looking for >8 channels.