BCM 50 to 400 VoIP

[wiredent]

I have a BCM50 trying to connect to extensions and access a PRI to send and receive calls through the 400. If you make a call from the 50 the 400 shows the VoIP trunk go active but no digits are received the line times out and goes to prime.

If you make a call from the 400 the 50 does not ever receive the call and the 400 never times the call out.

Please advise.

 

[wiredent]

I have found that if you restart the "VoiceNetVoIPGateway" service it will accept any changes and allow the system to communicate with out having to reboot the system.