I have a BCM 50 installed in Slovenija. The problem involve the fax machine that receive with missing parts or fails. I think the problem is due to loss of sync from ISDN lines.
The test of NT1 is ok, no errors, good BER. The clock is set to internal, this is the better way I found to limit problems. If I set up the primary sync like I use in Italy without problems, the fax fails almost any rx/tx. The same issue if i use the internal fax server.
Any help appreciated.
Luan Carli
The test of NT1 is ok, no errors, good BER. The clock is set to internal, this is the better way I found to limit problems. If I set up the primary sync like I use in Italy without problems, the fax fails almost any rx/tx. The same issue if i use the internal fax server.
Any help appreciated.
Luan Carli
