BCM 50 Remote Access using the modem

[TDSjeff]

I am trying to log into a 50 from a remote location but when I use Internet Explorer to enter the IP Address it brings up the 50 web page. Does anyone know how to get into programming from that screen? I am doing this via the modem.

 

[DigitelD]

You have to use Element Manager for the BCM50 and BCM 200/400 4.0.

SHK Certified (School of Hard Knocks)

 

[TDSjeff]

I tried that and it still will not log on.

 

[acewarlock]

You need to use a Dialup connection first the EM

 

[TDSjeff]

Sorry I did not give enough information. I have connected via a dial up connection and when I open Internet Explorer and enter the IP Address it takes me to the main web page for the BCM 50.(The down load aps page) How do I access the programming from there?

 

[biv343]

Programming is done via element manager in BCM 50's and release 4.0 systems. You need to download and install element manager then use that app to program. It's about 35MB, and that would take a painfully long time to download via dialup.