I need help with this one I'm fairly new to the bcm50 but my question is what is the best set up remote ip sets to the system. do i need vpn routers at both ends,Do i use static ip or nat. I have dsl and its a small office but i have two remote users i need advice on what is or should be the best set up and what equipment i should use or is working good out their.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 50 Question
- Thread starter firenut1
- Start date
I would recommend that you use the VPN client termination that's available on the BCM50 2.0. You might still run into NAT'ing issues because you need CONE NAT, NAT hair-pinning and making sure traffic gets through between the two. The easiest way is to use the 2050 soft phone with the VPN client software.
- Status
Similar threads
- Question
