cplamondon
Technical User
I have a physical line frozen on a BCM 50. When this is the IP port that is frozen, I know I can restart the service feps and it reset all IP ports. Can someone tell me there is a service for the physical line? Thank you!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 50 physical line frozen?
- Thread starter cplamondon
- Start date
- Status
Splic3d
Vendor
- Dec 28, 2012
- 499
- 0
- 0
I believe you will have to open the connection between the BCM and your telco if I understand you right. Them find out why its locking up. Bad trunk port,ect.
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
- Thread starter
- #3
cplamondon
Technical User
I finaly go to Utilities/Reset in BCM Element manager and proceed with a Warn reset telephony services and it works!
Thank you!
have a good weekend!
Thank you!
have a good weekend!
- Status
Similar threads
- Locked
- Question
