Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 50 network

Status
Not open for further replies.

ccarmock

Technical User
Oct 23, 2005
263
GB
Hi

In a network of BCM 50's (all on Rel 6 and patched) where H323 is used to network the systems together is there a way to suppress the H displayed on a destination sets display when a call is received?

UDP is being used as the network type.

I know on the larger CS1000's there was a plugin that could be loaded to supress it. Does anyone know of a way on a BCM?

 
If I remember correctly the H was there to show it as a Private Network Call. Not sure you'll see an H unless using CDP or UDP.
 
Yes you are right H shows that the call is a private network call. I read on the Meridian/CS1000 systems it's related to the term HLOC (home Location).

I don't believe you could get it to appear on a single BCM as you'd need to get a call into it marked as a private network call, so would need another system to send that call in
 
I tried switching to SIP trunks between the two BCM 50's and the H is gone....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top