Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 50 msg waiting lite stops working system wide

Status
Not open for further replies.
May 23, 2012
6
CA
I have a bcm 50 6.0 with the newest patch installed , the msg light and transfer messages between mailboxes stop working, i have to reboot to make it work. any ideas.
 
sounds like you could have a Drive going bad, be carefull because 1 day it might not reboot. Does all mail functions stop working?
 
hello, the hard drive was replace 6 months ago and this problem started after that, everything else on sets and voice mail works like it should. just these 2 things stop working.
 
I think SU 009 is the latest patch and has the fix for this issue
 
008 did it for somebody once too.

011 is the latest from May:

Software update BCM050.R600.VOICEMAIL-62
----------------------------------------

1. The Message Waiting Indicator (MWI)does not display intermittently
This improper behavior is caused due to delay in execution of semaphore
requests issued by voicemail to kernel. This update will correct the issue.
wi00955199

Customers post and say they have the latest, but how do they know they do?????


=----(((((((((()----=
curlycord
 
After doing all the updated patches and still nothing, what i have done is a level 2 restore , but first do a backup and then install the backup and that should work .
 
I have a BCM450 Rls 6 that has been doing the same thing. I think it is a bug from Avaya.

SHK Certified (School of Hard Knocks)
NCSS, ATSP/IP
 
some sort of coruption, it all started for me after replacing the core when it crashed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top