Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bcm 50 Keycode 2

Status
Not open for further replies.
Jul 26, 2004
433
US
I have a new BCM50 2.0 right out of the box. I tried loading the keycode file, the way I have on the since it came out, and it will not load. Has anyone seen this problem or is there a different procedure on 2.0 that I am not aware of.
 
I have installed a bcm 50 2.0 any it was the same procedure loading key codes from the previous software versions, thats about all i can tell ya good luck

 
I just ran into the same issue a couple minutes ago. I manually entered the keycode through the telset and it took. I've got an older version of Element Manager, and although the cartridge downloaded and installed I'm wondering if it's a problem with my version of Element Manager. I didn't take the time to try out that theory though.
 
Just confirmed. I downloaded the new version of Element Manager and things work normally now. I wasn't able to load software updates either with the older version, with the correct cartridge installed.
 
you have to download the new element manager or things wont take

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top