Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
BCM 50 hunt and call forward 1
- Thread starter john3700
- Start date
- Thread starter
- #2
-
1
- #3
Executor71
IS-IT--Management
Hi,
for example you have the I2050 DN 230 and the other phone on DN 250.
Just open the DN 230 of the I2050, go on the Line Access of the set, then down in the properties you can set up your forward in the fwd for no answer and fwd on busy lines.
You have only to choose the hount delay for your fwd for no answer.
Bye!
for example you have the I2050 DN 230 and the other phone on DN 250.
Just open the DN 230 of the I2050, go on the Line Access of the set, then down in the properties you can set up your forward in the fwd for no answer and fwd on busy lines.
You have only to choose the hount delay for your fwd for no answer.
Bye!
- Status
Similar threads
- Question
