Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 50 Call Pilot Primary UI

Status
Not open for further replies.

Butch42

Programmer
May 14, 2007
16
US
I have a BCM 50 that was recently installed. The customer complains that Feature 980 through Feature 987 does not work. Everytime i press Feture 985 i get Mbox. I tried changing primary UI to NVM and rebooted but no changes. Any ideas?
Thanks
 
it sounds like you need to re-install voice mail

there is a long feature number that you have to put it into the phone

that will put everything back to default

PLEASE NOT THAT YOU WILL LOSE ANY VOICE MAIL THAT YOU HAVE

you should find the number in the book , if you cant , let me know
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top