BCM 450 1.0 patching

[masterjim]

RE: BCM450 1.0 with 120 IP Client licenses and 120 11xx-series phones attached. No Digital station ports or devices.

We just applied the two patches listed below to the system.
BCM450.R100.SU.System-016.201110-2
BCM450.R100.SU.Desktop-008.201112-1

After rebooting and waiting 1.25 hours, system is still not coming up.

We disconnected all IP phones and reconnected one IP phone and it's firmware started to update.

We're still on site.
Is there a better way to do this patch?

Thanks for any help.
-Jim

 

[Firebird Scrambler]

it sounds as if there is some sort of corruption. I don't work on the 450's, but would have thought the boot up of the IP phones should be much quicker than 1 1/2 hours.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[phoneguy610]

are they 12xx series phones?

 

[masterjim]

Thanks guys.
We found the problem in a firewall that the customer had put up between the BCM450 and all of the IP phones! Go figure.
Regards,
-Jim