BCM 400 trunk to Asterisk VIA PRI

[labolas]

Good day,

I setup a PRI trunk between Asterisk and our BCM but I am unable to get call from Asterisk to the BCM

I was able to configure the PRI and all the B's and D come up, lots of happy green lights.

The BCM currently has 8 PSTN loop lines connected to it.

I removed the Pool A from my phone and added the Pool PRI-A to my phone but I am unable to dial 9 now "Denied in Admin"

I'm not a BCM guy (old M1 programmer).

What do i need to do to get the BCM setup to send calls across the private PRI to the Asterisk and what needs to be setup to allow for 4 digit dialing to the BCM.

Currently the BCM is 3 digits but would like incomming digits to be 4 digit and associated with the BCM DN's

Been reading the Nortel manual and not ready to fully learn another flavour of nortelize...

Please help, Thanks!

 

[labolas]

I am now able to make calls from the BCM to the Asterisk, I setup a Dialing plan using 5+asterisk ext to select the trunk and make the call.

Just need to setup inbound calls to the BCM.

Asterisk sent digits 4 -> 3 digit DN's on the BCM

Thanks