BCM 400 system printout? 2

[byrontel]

Possibly a dumb question...don't get too involved past programming , but is there a way to print out what is on system similar to a TNB,DNB,Trunk printout on an M1?
Thanks

 

[steeef]

type the following after choosing console:

f: (ENTER)
cd.. (ENTER)
cd Voice Solution (ENTER)

give it a try

 

[acewarlock]

Be careful using this during work hours, when I did this people weren't able to make or receive any outside calls.

 

[spunkysam69]

Hey after you get the generated report from telinv is there a way to automatically regenerate it back into the bcm?

 

[steeef]

i don't think so

 

[DigitelD]

I have generated the invfull.xml file. I am trying to download it. I have also enabled drive share for F:. How do I get a printout of this file?

SHK Certified (School of Hard Knocks)

 

[steeef]

After enabling the drive share for F: open up an explorer window an type "\\bcm-ip\DriveF$" (without quotes) into the address bar.
You will be prompted for a password now. Use your ee_admin login.

 

[DigitelD]

Thank you steeef! It worked. The printout is pretty big but it worked.

SHK Certified (School of Hard Knocks)

 

[MagnaRGP]

Am I missing something or is this how the printout is supposed to look?

<FTAPI Label="Feature+Tree+API">
- <KSU Label="KSU">
- <TelephonyFeatures Label="Telephony+features">
- <DNs Label="System+DNs">
- <TermsSetsDNs Label="Active+set+DNs">
- <TermsSetsDN Label="DN+400" Index="0">
- <TSSetGeneral Label="General">
<TSSetName Label="Name">RECEPTN</TSSetName>
<TSSetModelTop Label="Model">Other</TSSetModelTop>
<TSSetPort Label="Device+port">Port+0201</TSSetPort>
<TSSetCtlSet Label="Control+set">DN+400</TSSetCtlSet>
<TSCallLogSetPassword Label="Call+log+passwords" />
</TSSetGeneral>