BCM 400 system printout? 2

[byrontel]

Possibly a dumb question...don't get too involved past programming , but is there a way to print out what is on system similar to a TNB,DNB,Trunk printout on an M1?
Thanks

 

[biv343]

Not until release 4.0 unfortunately, far as I'm aware.

 

[steeef]

For all of those people who can't wait for 4.0
1. Login via SSH (using PuTTY)
2. Use the command line
3. Goto: F:\Program Files\Nortel Networks\Voice Solution
4. Run telinv.exe
5. Read Instructions

telinv.exe will create a XML file that you can download by enabling the BCM drive shares.

 

[byrontel]

1. Login via SSH (using PuTTY)????
Could you briefly define these terms?
Thanks

 

[steeef]

download PuTTY software (find it using google or download it from the BCM client software page)

enter the ip-address of the bcm, choose SSH as protocol and connect. login using the ee_admin account.

 

[NARSBARS]

steeef,
Thanks for the very clear explanation. Have a star.

NARSBARS

 

[steeef]

thanks

 

[NARSBARS]

Could you help a little more on the syntax and how to enable the shares?

NARSBARS

 

[acewarlock]

If you goto F:\Program Files\Nortel Networks\Voice Solution and type (telinv) it will print a list of commands.

you can goto Maintence and enable shares

 

[NARSBARS]

acewarlock,
I can get to maint ok now, thanks. I am still having syntax problems. Tried the telinv and telinv (space) cmd
Tried Telinv (no space command)
Tried Telinv/cmd
Telinv:cmd
Is it possible I am creating the file with one of the commands but expecting a feedback I am not seeing?
Appreciate the help.


NARSBARS

 

[acewarlock]

You need to us Putty to run telinv to get the List on Commands.

 

[sbrici]

I have a BCM400, for testing/playing purposes. I see 2 ethernet ports, 2 usb, one serial.

There is a modem card inside.
I want to connect on it using hyper terminal, but it seems that it's not responding, nothing on the terminal ...

I have an internal dhcp server on LAN, and I noticed above that could I connect via putty/ssh, you know if is setup to take an ip using a dhcp server by default?

 

[sbrici]

I just connect to the console using a null modem cable on the serial port, now I have to se what the username/pass/domain I should use to go in the CLI.

There is somewhere a default username and a password?
Should I reset the bcm before?

Thank'x.

 

[DigitelD]

You might do better if you start another thread with your specific question. Someone may answer it here but you would get alot more hits posting it separately.

 

[acewarlock]

It's not polite to highjack somene elses question. start a new thread.

 

[byrontel]

Thanks guys ...I'm off to Home Depot to get a putty knife.
Or maybe wait for Release 4.0
Yikes!

 

[NARSBARS]

acewarlock,
I can get the list of commands but I am having problems using the syntax correctly. Could it be printing the reports and I just don't realize it? I was looking for some feedback after entering the commands.
Thanks for the help and I won't be too embarassed if you have to tell me to use my "other" left hand.

NARSBARS

 

[steeef]

just type telinv -dc (for example)
this will create the file invdc.xml

please note:
after entering the command the bcm hangs for a while

 

[NARSBARS]

steeef,
Thanks with a star.

NARSBARS

 

[DigitelD]

Steeef, how do you get to F:\Program Files\Nortel Networks\Voice Solution? I tried and failed. It has to be something simple but it's Monday you know.