bcm 400 rel 4 mbm dipswitch settings

[jdisatech]

Hope someone can help I just cant seem to get my dipswitch settings correct. New install what would be the best configuration for dipswitches with the following mbms
1 dsm32+
1 g4x16
1 dti
2 gasm
any help would be appreciated thanks

 

[senk1s]

Bus 2 - DSM32+
Bus 3 - GASMs
Bus 4 - 4x16 (this will use 4 for trunk, 5 for stations)
Bus 7 - DTI

Switch settings should be on the installation guide

 

[jdisatech]

Thanks I have it set as follows
bus 2 d32+ - 1 off rest on
bus 3-g4x16 - 6 off rest on
3 will be for trunks 4 for stations
bus 5 gasm1 - 1,5,6 off rest on offset 0
gasm2 - 1,2,5,6 off rest on offset 2
bus 7 dti - 4,6 off rest on
will this work?