Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 IP trunks disabled

Status
Not open for further replies.

NextProblem

Programmer
Jan 20, 2010
9
US
I have two BCM 400"s and two BCM 50"s all linked together. 4 digit dialing between all switches has been working for some time now. Suddenly the IP trunks on both 400" show a state of N/A on Bus 0 under telephony resources, resulting in the inability to 4 digit dial. I am not able to enable and can't understand why. Any help would be greatly appriciated.

I only have time to do it right.
I don't have time to do it twice!
 
Are your keycodes still present?

Have you tried disabling and enabling the FEPS service?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top