Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 Disk Full F:

Status
Not open for further replies.

jharos

Technical User
May 31, 2012
3
MX
Hi, i have a Nortel BCM 400 3.7 running, suddenly after a power outage all telephony service configuration got wiped.


Anyway, config has been applied but the F: partition is Full, i have been searching on the forum ([URL unfurl="true"]http://www.tek-tips.com/viewthread.cfm?qid=1500686[/url]) they are talking about a patch (370.194), but is there a place to download bcm 3.7 patches, seems everything dissapeared since avaya ate nortel.


The company i bought the bcm, is telling me to replace my bcm for an avaya ip office but dont have the money to buy it.


Thank you
 
I would still suggest to swap to a linux version and to get rid of the embedded NT... IPO still suckz compared to the BCM R6....
 
I agree with the last comment. £160 isn't a bad price in the UK for a keycode upgrade from 3.7 to 4.0. Although the product is now end of life, Linux makes it a good system and would give you a few more years of service.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Thank you all for your help, will try the patch this weekend. Will check the possibility to upgrade to 4.0, also someone told me to upgrade to Avaya BCM 450 but i still don't know prices.

 
If it is a 3.7 box, you still have the ability to access it through serial and modify each partition, where you could see what files are in F and possibly delete some before you attempt an upgrade, for a full partition may cause the upgrade to fail.

Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E
Mitel 3300 4.2 basic & advanced, 5000 4.0, NuPoint I&M 4.2
 
A full partition would fail the pre-check !!

If its not broke tweak it..
 
it failed for full partition don't know what files are safe to move out of the partition.
 
F: drive is usually full due to CDR logs

If its not broke tweak it..
 
CDR logs are typically useless unless you have a 3rd party software tracking your CDR data, so you can free up that space, then proceed with the upgrade.

Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE CS1000E
Mitel 3300 4.2 basic & advanced, 5000 4.0, NuPoint I&M 4.2
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top