Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 Dip Switch settings 1

Status
Not open for further replies.

Tickets Away

Programmer
Jun 14, 2017
17
US
I read the docs on this but it is a little confusing because of the old SW versions. I have a BCM 400 with 4.0 with 2 hard drives. SW and I am installing the following just in the main cabinet and I am not able to get the dip switches set properly. Does anyone know what they should be for each unit? On the BCM50 they are always ON.

BAY-1 DTM ( PRI ) TOP BAY
BAY-2 DSM 32+
BAY-3 ADM-8
BAY-4 ASM-8

Thank you.
 
The dip switch settings might vary depending on the current split parameter setting. This limits the amount of bus options and some modules such as ASM 8 can be configured on the same bus but follow on in port number order.

I have attached the installation PDF file.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top