Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 Cooling Fan Light

Status
Not open for further replies.

NextProblem

Programmer
Jan 20, 2010
9
US
Going out to replace a BCM 400 cooling fan today. Not sure if the red light will go out when the fan is replaced or if there is a reset command that will need to be entered. Also I have read that I can replace the fan without powering down the system, anyone have any further input on that. Thanks in advance for the help.

I only have time to do it right.
I don't have time to do it twice!
 
The light will go out and you can do it while the BCM is on. Becarefull.
 
Thanks 1082.

I only have time to do it right.
I don't have time to do it twice!
 
For future here is the BCM forum:




=----(((((((((()----=
curlycord

small-logo-sig.png

Toronto Canada
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top