Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 50-1 Alarm

Status
Not open for further replies.

cbice

IS-IT--Management
Feb 6, 2007
12
US
I received a 50-1 Alarm, after receiving it none of the features worked and the phone system for the most part stopped working till it was rebooted. Does anyone have a clue as to what the 50-1 Alarm is?

Im running BCM Version 3.01

Thanks in advance
 
50-1 is something along the lines of "system lost communication with MSC card".

I've seen that happen on 3.01 systems that didn't have core patch 3.18 installed. I'd check that first.
 
How would i go about checking what core patch i am currently on. or where would I go to obtain patches for the system.

Thanks

Chris
 
Go into Maintenance and then open System Information and you can choose from different inventory lists. I forget which it is under but you can look at what patches are installed. If you do a complete inventory list this will tell you what patches are installed.

SHK Certified (School of Hard Knocks)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top