Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 400 4.0 to Cs1k 4.0 sip name display

Status
Not open for further replies.

BCMTinkerer

Technical User
Feb 20, 2008
110
US
How do i get the name display to pass over SIP trunks,,,,now i only see H5300 when i call from the bcm to the cs1K

In ip trunk settings,,,send name display is checked
the target lines have caller id set checked
the set has a name
the set has a private oli
the sip route is private.
 
Figured it out,,,,need to define businesws name in order to pass the name.

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top