Bcm 4.0 networking ?

[phitzer]

I have a BCM 4.0 and 2 BCM 50 rls 2.

I have point to point t1's from the 400 network both 50 networks, and all BCMs are on the LAN behind routers.

Just purchassed MCDN and VOIP trunks, my question is will I need to build static routes under IPsec VPN? Or can I do all the programming from IP trunk setting and build routing tables with the required destination digits?

 

[cook1082]

Just Routing and target lines.

 

[phitzer]

routing tables? or static routes? or do I need to config both?

 

[phitzer]

Ok I know I need the routes pointing at ips and target lines, routes , dest codes...

Do I need to also build branch office tunnels under data services? Or is this only if the BCM is on the WAN? I really thank for the help as this is the first BCM I've had to network toghether.

 

[Deweyhumbolt]

Only the routing info, like cook posted. No static routes or Branch office tunnels.

Adversity is Opportunity