BCM 3.7 to 4.0 Upgrade

[john219]

I am upgrading a BCM 3.7 to 4.0 and receiving an error message. The error message is that my partition on my hardrive are incorrect. I have never divide partitions before? Need to know how to do this.

 

[cook1082]

Did you run the pre-check tool first to see if it could be upgraded.

 

[john219]

Yes I have upgraded 15+ and this is the first one that is giving me this error.

 

[Dasheen]

Was this a reimaged drive created via ghosting?

 

[john219]

I don't think so.

 

[TLDuk]

Incorrectly imaging a drive with ghost is the most probable cause..

you will need to do the following to fix this

1. Backup the system with BRU
2. Re-image the drive correctly
3. Perform platform a initialisation
4. Retore the system with BRU
5. Perform v4 upgrade



If its not broke tweak it..

 

[Aerodesliza]

TLDUK give you the right answer, the same happen to me