Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM 3.6 update 360.292-Voice Mail

Status
Not open for further replies.

DigitelD

Vendor
Mar 21, 2006
2,014
US
Has anyone successfully installed the 360.292 Voice Mail update? The reason for my question is that I tried to install it and it never did complete. We went in to add another update and the Voice Mail never did come back up. The Voice Mail service was completely deleted off the hard drive, which as you can imagine, caused alot of problems. We replaced the hard drive and the problems were fixed.
 
I'll fire up my lab system in a few minutes and try it out. I'll post back with my sucess/failure story.
 
OK - I take that back. I don't have a 3.6 lab system anymore. It got upgraded. Only 3.6 BCM I have here has SRG software on it - kinda hard to test voicemail from an SRG.
 
I have applied this patch to at least 8 of my systems and all were successful. This was done at the beginning of July and they are all still running. These patches were done with a Core, Fireware and RCC patch.
 
I installed the equivalent patch for BCM 3.7 tonight without any issues.
 
i have installed this one ok sometimes i give the bcm a reboot before starting anypatches might help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top