BCM 200 V 3.7

[norstargirl]

I have a BCM 200 V3.7 with a Gatm8 that the lines keep locking up - this is running through a channel bank and the channel bank has been replaced, and the gatm8 has as well. What is the voltgage for the lines through the bcm or can you think of anything else that is causing the problem.

M.Parnell
(norstargirl)

 

[hawkflorida]

Have you looked into a possible line supervision issue?

Consulting -
If You're Not A Part Of The Solution, There's Good Money To Be Made In Prolonging The Problem.

 

[snowman50]

Line lockup are usually caused by line supervision issues..The line needs to be set to the correct type to suit your network.