BCM 200 DSM16+ not recognized

[bednarekluc]

Hello,

I' am setting up a new BCM 200 R 4.0.2.03a, with a 5/3 split.
I have a BRI module on bus 6 and try to put a DSM16+ on bus 2 (jumpers OFF ON ON ON ON ON ON ON). But it doesn't show up in the telephony resources. Bus 2 keeps showing not equiped. Anybody knows how to fix this ?

 

[TWISTEDAPP]

It won't show anything until you hook up a set on the module.

 

[bednarekluc]

Thanks for the great tip. just connected an ATA to it now it is indeed enabled and the ata is recognized.
Thanks again.