BC12.1 QSIG connection to BT ITS Dealerboard

[gedii]

Hi

Could somebody please advise me of typical "RODAI/ROCAI" settings to connect to a BT ITS Dealerbaord, using QSIG (TLU76/1) ?

Also, could you advise of the "colour" code of the ROF 901 0481 cable in terms of the Tx/Rx and also what colours need to terminate on what pins of an RJ45 connector ? This is a 4-wire cable (White, Blue, Purple, Indigo?)

Many thanks

gedii.

 

[whosrdaddy]

about colour code :

white,blue =1,2 on rj-45
indigo,purple=4,5 on rj-45

if not working , reverse pairs

for RODAI/ROCAI, what MD110 version do you have?? (CADAP

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[gedii]

Hi Whosrdaddy,

The system is at BC12.1 (SP9) GB. Is that enough info ?

Thankyou for the RJ45 detail in the meantime.

gedii.

 

[fidde]

Program it as a normal Qsig GF route (there are several examples here) it's the same as if you would use it towards Cisco, Avaya or Nortel. But more important make sure you have the latest software on the DLIC card in BT, else you will have problem with progress sent from MD.

Fredrik

 

[CIF]

Hello,

This is for DPNSS BC12 sp3:

rodai:rou=100,type=tl50,varc=00000001,vari=00000000,varo=00000000,filter=no;

rocai:rou=100,sel=711000000000001,sig=211110000011,trm=5,traf=00151515,serv=2110000001,bcap=111111;

roddi:dest=855,rou=100,adc=00050000000002500000000,trc=0,srt=4;

roeqi:rou=100,tru=27-1&&27-15,equ=27-1-50-01; roeqi:rou=100,tru=27-16&&27-30,equ=27-1-50-16;