BC11 on DPNSS CAB not work!

[vegemvan]

Hi All:
We have connected two BC11 system using DPNSS.
Using EN is exchange number and display information
RONDI:ROU=xx,EXNOPR=5-EN;
in RODDI ADC=x5051xx....;
CAB is not work if extension is busy.
How parameters changes confirm OK activity?

Thanks
Vegemvan

 

[SYAR2003]

ADC for DPNSS shall be 05050XXXXXXXXXXXXX5....

(D19 shall be equal to D2)

 

[vegemvan]

ADC parameter changes, thanks.
mode1: sample EN=07
RODDI DEST=extension number first digi
RONDI EXNOPR=5-07
if extension is no answer is NOT work
if exetension is busy is WORK

mode2: sample EN=empty
RODDI DEST=extension number first digi and 07
RONDI EXNOPR=5-07
if extension is no answer is WORK
if exetension is busy is NOT work

Best regards
Vegemvan

 

[SYAR2003]

Since you change the a numbers with rondi .
the callbacks use the EN number dests

The EN number must be different in each node .

Example

[tt]Node A Node B
[tt]EN=07 EN=08
Extensions Extensions
1000-1099 2000-2099
Roddi:dest=08---------->
Roddi:dest=2---------->

<-----------------Roddi:dest=07,
<-----------------Roddi:dest=1,


1000 calls 2000 In 2000 display it shows 071000

1000 orders CAB CAB request stores
callback to nr.071000

Callback executes to
<-----------------Roddi:dest=07,+1000

Thats how it works with EN numbers if
you use the for diplay purposes also. [/tt]



Hope this explains

SYAR

 

[vegemvan]

Syar
Not different EN number A node and B node
EN number USE area mark
C node use different EN number

A node between C node refer B node between C node CAB OK!

CAB A node between B node NOT work!

Can you help?

Best regards
vegemvan

 

[SYAR2003]

First correct this:
EN numbers in a network has to be unique.

ADC parameter changes, thanks.
mode1: sample EN=07
RODDI DEST=extension number first digi
RONDI EXNOPR=5-07
if extension is no answer is NOT work
if exetension is busy is WORK

mode2: sample EN=empty
RODDI DEST=extension number first digi and 07
RONDI EXNOPR=5-07 delete this one ,not applicable
Have a dest in this one to node a =07,srt=1
if extension is no answer is WORK
if exetension is busy is NOT work
Make a dest in this one to node 1 DEST=07,SRT=1,ADC=05050.......5...


It wont work if you dont have revesed dests for EXNOPR=5-XA
EXNOPR=5-XB
Trust me on that .
Only other way is to drop exnopr a-number prefix .

Could be like this
[tt]Node A Node B Node C
EN=070 EN=071 EN=072
exnopr=5-070 exnopr=5-071 exnopr=5-072
dest=071 dest=070 dest=070
dest=072 dest=072 dest=071


[/tt]
The composed Connected number is defined by received TON of Calling party's number.

In order to make display and network services to work properly, the private exchange numbers that prefix the directory number (stated by EXNOPR in the RONDI command) also have to be initiated as own exchange numbers. This is because if a part of the number is found to be own exchange number, the ASB 501 removes this part(s) of the number before displaying or executing a network service.



Sorry that's how it must be ,i'm not a magician

 

[vegemvan]

SYAR!
Thank you help!

I find result the problem, no too elegant

A node B node

EN=07 EN=07
EXNOPR=empty EXNOPR=empty
EX=1000 EX=3000
DEST=3 DEST=1
NUTRI:ENTRY=1 NUTRI:ENTRY=3
CNVTYP=1 CNVTYP=1
NUMTYP=11 NUMTYP=11
PRE=07 PRE=07

NUTRI:ENTRY=07 NUTRI:ENTRY=07
CNVTYP=2 CNVTYP=2
NUMTYP=5 NUMTYP=5
TRC=2 TRC=2

Best regards
vegemvan

 

[whosrdaddy]

off course that this will work, but the main problem is , just like syar said, use DIFFERENT exchange numbers in the 2 nodes and it will work!

http://www.damovo.com

 

[SYAR2003]

excellent.

By the way:
I think you could remove the numtyp=en in
both sites with theese nutri's.


syar