Bc 12 SP5 create INL with NIU2

[SAPA2001]

hi to everybody

I have a problem in to load INL SP5 on NIU2
when I am connected me to the NIU2 through commands niux the system he/she answers me inavalid logon.
I have tried to insert the NIU2 in a magazine with only the Power but the result it doesn't change
the NIU2 is adjourned in R6A
does a reset exist for the NIU2?
how can I write EIC number?
thank in advance
Br Paolo

 

[patcher]

user id MDUSER and psw HELP without semicolon. Or else plug the board in a working LIM that you know the password and use that password.
niux>readeic a <enter> to check the code
niux>writeeic xxxx nn, nn is AS(application system) while xxxx is IPA number(customer).

Not sure about your INL and why its not loading. Do you have LPU display and tell me what is in the display.

 

[SAPA2001]

hello

I have already used a system load with Mduser help
unfortunately the result doesn't change
Br
Paolo

 

[MDfreak]

what's the disply on LPU?
i guess you have no INL on the NIU2.

 

[SAPA2001]

Hello
unfortunately I don't remember the code of the display card

hardly possible I will try to refer a new attempt.

Br Paolo

 

[MDfreak]

take alot of care if you write EIC on NIU2 you won't can over write it again.
as well as, writing EIC is done once for NIU2.