Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BC 11 - BC 12

Status
Not open for further replies.

taurus2711

Technical User
Apr 27, 2006
16
IT
I MUST MODERNIZE A SYSTEM MD 110 IN BC 11 AND MAKE IT TO BECOME BC 12 AS I MUST MAKE? YOU COULD SUGGEST THE BETTER PROCEDURE TO ME? HELLO AND THANKS

DEVO AGGIORNARE UN SISTEMA MD 110 IN BC 11 E FARLO DIVENTARE BC 12 COME DEVO FARE?? MI POTRESTE SUGGERIRE LA PROCEDURA MIGLIORE?? CIAO E GRAZIE
 
Hi,

First of all your system has an IPA number. With this number you must order an upgrade from Ericsson. You will get the new licences from Ericsson. At this step you have 2 choices. You can send your system configuration to Ericsson which has been get via PCREGEN and order for an easy software upgrade. You will get a dump of your system at BC12. Loading this dump to your hard disk and reboot the system after 5 minutes (1 LIM syatem) your system is BC12. The second way is you get an INL (initial load) of the system load it to hard disk reboot the system and send the configuration via PCREGEN It will take 1-2 hours (1 LIM system). But do not forget some of these procedures are tricky. Be sure you got someone by you who did this before.
 
Yes, kank is right. You must order an upgrade to BC12 from your local Ericsson representative.

But!!! You must decide in advance - what you want - and then pass it in written form to those who will do it (who will do it your upgrade).

 
Hi to all

I thing that KANK & HIREI forget about FM
If I remember upgrade from BC 11 to BC 12 needs changing PROM-s on
LPU, LSU and DSU and other board
And memory on LPU if is not 64 Kb

To Taurus
Send to as printout of command
CNLIP;


----------------------------------
If anything can go wrong, it will.

(Murphy's Law)
 
taurus2711,

Upgrade procedure above is correct.

But forget about BC12.
Upgrade directly to "MX-ONE Telephony System – Telephony Switch". This is new name of MD110. You can consider it as MD110 BC13.

BC12 will be in passive sustaining in 5-6 month and SP11 will be the last update.

If you don't plan to use new boards (IPLU, TLU76/11 etc) Telephony Switch is rather stabile now.

Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top