BayStack Advanced Remote Node (ARN) Password recover/reset? 1

[cwessex]

How does one recover or reset the password on a BayStack Advanced Remote Node (ARN)?

Are there any technical guides available for this router? Thanh-you

 

[cwessex]

Bay Tecnical info is at

http://support.baynetworks.com/library/tpubs

It doesn't have any password recovery information that I could find.

 

[ihiepler]

you can find the informatione in this forum in another posting

Ingo

 

[ditleporc]

RMA is the only and easyest way to recover your password.
Buy a new router, exchange the mother boards and ask Nortel for a DOA RMA, you'll get a brand new router. I know i'm a bandit.B-)

 

[gunfighter]

there is a jumper on the main board (sorry can't rember wich one) that can be pulled to reset the password to factory.

 

[gunfighter]

Try This before the Jumper.

1.Power cycle the ARN.

2.When the ARN starts cycling through Power On Diags, type Ctrl C followed by a carriage return. This will put you in diagnostic mode and you will see the following prompt:

Diag_1>

3.At this prompt, type in the following command exactly:

d/l/n:5 410000 0

This sequence will blank out the Manager password in NVRAM.

4.Type boot or power cycle the ARN. There is no longer a Manager password.