Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BayRS Default TFTP Timeout during transfer 1

Status
Not open for further replies.

AndrewAllen

Technical User
Jan 23, 2004
17
0
0
US
Hello again,

does anyone know what BayRS's default timeout is once a TFTP transfer has begun? Ie, how long between packets before the router gives up and aborts the transfer.

thanks,

andy

Andy Ford
Uplogix, Inc.
Austin
 
I think the default is 25 Seconds. If you look at the TFTP values on Sitemanager, it has a retry timeout parameter of 5 seconds which specifies the number of seconds TFTP waits for an acknowledgment before retransmitting the last packet. And a retransmit value of 5 which is the number of times TFTP transmits an unacknowledged message before abandoning the transfer.

Which from my thinking is 5 x 5 = 25 seconds. These are configurable though.

Hope this helps
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top