Bay Network ARN Router HELP.!!!! 1

[Radar817]

I need a lot of help. Very green ...but listen well.

I am helping a School figure out there LAN.

They have a Bay Networks ARN Router ...that no-one knows the password to.

Can someone please help me on password recovery on this... it is a Model CV-1001004 ARN Bay Networks router. I am a Cisco person. So, a little help would be much appeciated.

Thanks a lot
Farris

and the School thanks you.

Please let me know.

 

[jdrennan]

1. Power Cycle the ARN.
2. When the ARN starts cycling through Power on Diags,
Type Cntl C followed by a carriage return. This will put you in diagnostics mode and you will see the following prompt. diag_1>>
3. At this prompt, type in the following command exactly as is: d/l/n:5 410000 0
This sequence will blank out the Manager password in NVRAM.
4. Type boot or power cycle the ARN and off you go. There is no longer a Manager password.