Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bag DUSYI

Status
Not open for further replies.

vkrt

Technical User
Nov 25, 2011
67
RU
VERSION: CXP1010139/4/TSW-SP08/R9A 11 LIM
There was a problem with a dump of the station.
LIM5 tried to reboot.
Did RFEXI.
Nothing helped.
Tested LIM and GSM according to ALEX.
Nothing is revealed.
There are thoughts about it?

<dusyi;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE
SUCCESSFUL
WAIT FOR DUMP TO LOCAL BACKUP
RESULT OF DUMP TO LOCAL BACKUP
SUCCESSFUL
RESULT OF DUMP TO EXTERNAL BACKUP

PRODUCT IDENTITY FILE DUMPED
STATION IDENTITY FILE DUMPED
I/O LIM PROGRAM FILE DUMPED
PROGRAM TIME DATE
EXS 14:37 02APR19
PRP 14:37 02APR19
..........................
AUM7 14:47 02APR19
AUM8 14:47 02APR19
DMGM 14:47 02APR19

DATA TIME DATE
LIM001 14:49 02APR19
LIM002 14:50 02APR19
LIM003 14:52 02APR19
LIM004 14:54 02APR19

BUFFER TRANSFER ERROR 14:55 02APR19
FAILED IN LIM005 FOR LIM RELOAD DATA FILE

END
DATE: 02APR19 TIME: 14:57:07
CLASS: 3
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
02APR19 14:55:19 1 1 001-0-60-00 106 391 0 5 1


LAST ALREI: 02APR19, 14:32:08

END

 
Gjrei;
After 20 min try with dusyi; and then
Gjlsp:print=all;
Be care fully ! If you try too many both rel gone notvalid and you is in big trouble so just test with dubdp and if both rel is valid remove flash as backup and putfresh one

PG4E
 
ftp is useless belive me ! you is in big trouble now hdd is empty and you have problem with GROUP SWITCH ...
scexp;
scicp;
and dont play with dusyi or rfexi or lalrl or something like that ... you have clock bus fault and lost signal in group switch so in this case you most first fix this one if this problem continue you never can have a succesfully backup.


PG4E
 
So you have 2 external clock in lim1? Which rou coming from pstn?

PG4E
 
Try with
syedp:bpos=1-0-20&1-0-30;
Then gjlcp:lim=1;
gjlcp:lim=2;
gjlcp:lim=3;
Gjtsp:lim=5;
Cnlip:lim=5;
Ilssp;


PG4E
 
Scici:mccl=0-0,rccl=0-2,accl=0-4;
And after this wait 5 min and
Illai;
So now check display in Gcu2 show what?
And check 5 led s in middle of Gcu2 board green.green.red.red.yellow
And tell me about led top of gsu board(which of red or yellow is on?


PG4E
 
Both red is active in gcu2? Or off?
What about( . ) In gcu2 display? Blink or static?

PG4E
 
So you did scici?
Scici:mccl=0-0,rccl=0-2,accl=0-4
All green most be on
First is Mccl
Second is rccl
Third is accl
Can continue in privacy?
Pari_bordu1985@yahoo.com

PG4E
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top