bad ports on passport 8600

[wanyph]

Hi!

I´ve a problem with some GB ports on my passport 8600.
When I connect a host, I have a link, but I cannot ping across the network.
When I take the next port, it works perfekt.
The module has 16 ports.

port 1 doesn´t work.
port 2 is OK.
port 3 doesn´t work.
port 4 - 16 is ok.

The settings are the same.

Do you know what I can do?


thanks,
mewi

 

[pseudocybe]

We've seen this problem on our 8600's. Replace the blade.

 

[mondeo123]

Dear Mr Mewi,

Well as per the problem description the suggested solution would be :
1.Kindly check the port status in terms of up or down
2.Kindly try to shut down the port 1 and port 3 and make it up.
3.IF Nothing is possible then I am sure that these particular number of ports are physically bad ports wherein only the Nortel Support Engineer would be able to replace it.

regds
Dheeru

 

[wanyph]

thanks for your answers.


I´m now sure that the module must be replaced.



mewi

 

[yawnbob]

Check this out also.

thread902-540052

 

[DragonGo]

I think maybe some dirty in these bad port,plz check it carefully

 

[JAYLENOX]

YOU MAY WANT TO PUT THE GBIC IN A SOFTWARE LOOPBACK. ALSO, FAST START DOES SOME STRANGE THINGS. YOU MAY WANT TO DISABLE FAST START IF ITS ENABLED. MAKE SURE YOU FIBER IS CLEAN. TRY MOVING THE GBIC INTO A DIFFERENT PORT ON THE BASEBOARD. GOOD LUCK!! CHEERS