Have 2 different sites. At each we have a Dell PowerVault 122T LTO connected to a PowerEdge 4600 W2K3 F&P server. Backup Exec Ver 9.1 loaded on both.
Backups are painfully slow on both. 98MB/min (6GB/hr) No prescan/verify. (capable of 900MB/min, 54GB/hr)
Most of the data is on the F&P itself, however we have tried just backing up remote servers with the same throughput experienced.
Have we missed anything configuration wise??? At a bit of a loss as we cannot see anything obvious to alter.
Have updated SCSI drivers to latest Adaptec ones (39160 card)
Thanks in advance (hopefully)
JW
Backups are painfully slow on both. 98MB/min (6GB/hr) No prescan/verify. (capable of 900MB/min, 54GB/hr)
Most of the data is on the F&P itself, however we have tried just backing up remote servers with the same throughput experienced.
Have we missed anything configuration wise??? At a bit of a loss as we cannot see anything obvious to alter.
Have updated SCSI drivers to latest Adaptec ones (39160 card)
Thanks in advance (hopefully)
JW