Backup Exec 10.d work with HP Storageworks vs80 1/8 Autoloader?

[kennyk06]

Hi,

This is what I have found so far : Neither on HP nor Symantec HCL
(Hardware Compatibility List)
show this particular Autoloader is listed as compatible.


Symantec HCL :

http://seer.support.veritas.com/docs/281670.htm

I am just curious if there is anyone out there who is using this device
with the 10.d without any problem.


Thanks,


KennyK

 

[PaulC245]

We are using it with 10d with no problems. We are using the HP drivers and not any Veritas/Symantec ones.
We upgraded from 9.1 to 10 and then to 10d, we haven't used one with a fresh install.

 

[kennyk06]

PaulC,

Thanks for your Info. Could you please let me know what kind of card you use to connect your machine to the Autoloader? I have only PCI bus on the machine and can't seem to find the PCI-SCSI card that works well in our system. Do you use PCI card as well?

Thanks,