Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Backup Exec 10.d work with HP Storageworks vs80 1/8 Autoloader?

Status
Not open for further replies.

kennyk06

Instructor
Jun 13, 2006
6
NL
Hi,

This is what I have found so far : Neither on HP nor Symantec HCL
(Hardware Compatibility List)
show this particular Autoloader is listed as compatible.


Symantec HCL :

I am just curious if there is anyone out there who is using this device
with the 10.d without any problem.


Thanks,


KennyK
 
We are using it with 10d with no problems. We are using the HP drivers and not any Veritas/Symantec ones.
We upgraded from 9.1 to 10 and then to 10d, we haven't used one with a fresh install.
 
PaulC,

Thanks for your Info. Could you please let me know what kind of card you use to connect your machine to the Autoloader? I have only PCI bus on the machine and can't seem to find the PCI-SCSI card that works well in our system. Do you use PCI card as well?

Thanks,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top