BAB SAN crossplatform Windows and Linux problem

[orlandofr]

We have a cross-platform SAN environment. We have 5 Windows servers and one Linux Server (red Hat 4.3). We follow the user guide for the setup but the primary windows server can not connect to the primary linux server. The SANPEER.log contains the following

(01/14 13:37:13) **********************************************************

(01/14 13:37:13) BrightStor SAN Option

(01/14 13:37:13) **********************************************************

(01/14 13:37:13)

(01/14 13:37:13) CAPEER: Local peer has loaded and is begining intiailziation.
(01/14 13:37:13) Client connection mode has been set to normal.
(01/14 13:37:13) Contacting CATIRPC to establish the PCS RPC services
(01/14 13:37:13) CAPEER: Calling svc_unregister() to clear any outstanding registrations.
(01/14 13:37:13) CAPEER: Calling svctcp_create()...
(01/14 13:37:13) CAPEER: svctcp_create() returned [0102ADA0] as pointer...
(01/14 13:37:13) CAPEER: Calling svc_register()...
(01/14 13:37:13) CAPEER: Loading the Shared Domain Server List into memory
(01/14 13:37:13) Constructing the list of enterprise Members from the EDF **
(01/14 13:37:13) serverName [PBBNCR02925.PBB] running on platform [UNIX] found in config file
(01/14 13:37:13) serverName [PBBNCR03171] running on platform [NT] found in config file
(01/14 13:37:13) Total number of server found in config file = [2]
(01/14 13:37:13) Total number of server found with same platform as host (including host) = [1]
(01/14 13:37:13) Total number of server found with different platform as host = [1]
(01/14 13:37:13) The load time behavior was not in the EDF, default to static
(01/14 13:37:13) Static behavior has been directed by the EDF for load time sempahore location.
(01/14 13:37:13) The fault behavior was not in the EDF, default to static
(01/14 13:37:13) Enterprise sempahore control is in static mode.
(01/14 13:37:13) Protocol "tcp" has been specified in the EDF
(01/14 13:37:13) CAPEER: Peer services have been established, beginning network discovery
(01/14 13:37:13) Begining initial enterprise state discovery.--**--**--**--
(01/14 13:37:13) Attempting to contact the peer on server [PBBNCR02925.PBB]
(01/14 13:37:13) ECFPingServerRPC()
(01/14 13:37:13) ECFPingServerRPC(): using [tcp].
(01/14 13:37:13) rpc_nullproc() Using RPC version 2
(01/14 13:37:13) EMFCheckForRPC() returns [0]
(01/14 13:37:13) The peer on [PBBNCR02925.PBB] is now active.
(01/14 13:37:13) Attempting to contact the peer on server [PBBNCR03171]
(01/14 13:37:13) ECFPingServerRPC()
(01/14 13:37:13) ECFPingServerRPC(): using [tcp].
(01/14 13:37:13) rpc_nullproc() Using RPC version 2
(01/14 13:37:13) EMFCheckForRPC() returns [0]
(01/14 13:37:13) The peer on [PBBNCR03171] is now active.
(01/14 13:37:13) Enterprise initial discovery is complete.--**--**--**--
(01/14 13:37:13) We cannot be the Primary. [PBBNCR02925.PBBN.INT.COM] is already a Primary server.
(01/14 13:37:13) E1000B CAPEER: Local Peer initialization failed, unloading
(01/14 13:37:13) No connection to the ghost detected
(01/14 13:37:13) Destroying the list of enterprise Members
(01/14 13:37:14) Primary PEER is present and functioning.
(01/14 13:41:17) The 'enumerate members' function failed
(01/14 13:41:17) CAPEER: Local peer shutting down after receiving 'server down' notification
(01/14 13:41:17) CAPEER: Calling svc_unregister()...
(01/14 13:41:17) CAPEER: svc_unregister() is done.

Any suggestion is welcome....

 

[davidmichel]

Start by shutting down ARCserve on the LINUX box and verify the Windows only installation is working fine with the library.

Then if there are still problems check the capeer.log on the Windows side that should be of more help.

Also check sanpeer.cfg and on each system ck edf.ini to make sure they are exactly the same.

 

[orlandofr]

Thank you for your answer. All Windows servers works fine alone. The linux server works fine alone. We can to setup the cross-platform environment. Do you have any other suggestion?

 

[davidmichel]

Then if there are still problems check the capeer.log on the Windows side that should be of more help.

Also check sanpeer.cfg and on each system ck edf.ini to make sure they are exactly the same.