Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BAB 11.5 SP4 LOST CONFIGURATION AFTER REBOOT

Status
Not open for further replies.

ugirozr

Technical User
Apr 27, 2006
6
CA
HI.

I'm in the process of setting up a Backup server, with scsi adaptec 39160 and I use staging option with dell autoloader powervault 124t.

I config dell pv124t with device configuration.
configured 2 groups FTape and ITape
Tape 1 -8 for Ftape (full-tape)
Tape 9-16 for Itape (incremental)

I config tree staging groups
fdata
differ
fgalaxy


it is works.


all backups job is working.

after reboot machine, I lost my configuration , I reconfig the setting. it 's work.

Ftape and Itape was rename group0


My question is, do I need anything to good configuration my groups?

Any help/advice would be greatly appreciated.

 
This can happen if there is any change in the configuration such as drive designation. The Tape Engine checks the OS device map in the registry and any change there can result in this.

Try disabling the library and tape drives from within the OS Device Manager, or at least do not load the Dell LTO driver.
 
I changed my setup and everything works.

thank you for your help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top