B8 backward signal when the phone is locked out

[rokane]

Can anyone knows how to change the mfc backward signal to B8 on TLP30 when the called extension is lockout or blocked
state? The MD110 is BC12 sp5 Application standard.

 

[fcpli]

Rokane:
This function is implemented in AS Argentina. If you really are there, use VARC xxxxxxxF, if not, test with the new VARC carefully!

 

[MATOVTZ]

You have two choices: change signalling from AXE to CCITT (VARC=D8) or ask E/// for patch. In BC11 patch is S98747A.
I have only for BC11.

 

[fcpli]

rokane:

Pls provide rodap of that route.

 

[rokane]

fcpli,

Herewith the rodap & the rocap data for the route.

ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
76 TL30 H'00000000 H'00002732 H'00002656 NO

END
<ROCAP:ROU=ALL;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
76 7110000000000010 6 2100000011 0 30 128 00151515 311100000050 111111

END

 

[rokane]

fcpli,

Tnank you very much , the value "F" in varc works. No need
for Argentina application standard.

many thanks,

rokane