Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

B179 conference phone

Status
Not open for further replies.

Zero6

Technical User
Oct 20, 2016
304
CW
Hi All,

I installed a b179 that belong to the client at my office for testing.
The phone registered and could make and receive calls.
I left for a few hours connected and when I came back the phone was not registered anymore.
I unplugged it and it turns on and I can login.
All the config are the same,I did a factory reset of the phone
Once it turns on it say registering, but does nothing more.
Has this happen to anybody else, because this is the first time I have encountered this issue.

Thank you in advance
 
Could be a number of things, but you might want to start with turning off provisioning. Double check that the SIP method it's using to connect (UDP/TCP/TLS) is properly configured on the IPO.

-----------------------------------
4771494_orig.jpg

Calgary Cloud Phones for Business and Avaya Hosted PBX in Calgary
 
Had this happen before.

If you're using TLS, make sure it's the latest firmware. Otherwise you UDP/TCP.

You can also disable TLS on the B179 when you browse to it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top