Does anyone have a link to setup instructions for a B179 SIP conference phone with an IP Office? I have the instructions for the phone itself but not the IP Office side. I am really wondering what SIP fields need to be filled out.
Just fill in the phone number you like (not programmerd in the IPO) and only for the Authentatcation Name use a Name, then as a password use 0000 thats it. The IPO should auto create the number.
___________________________________________
It works! Now if only I could remember what I did...
Here is the cheat sheet I created for our technicians
1) Configure a user in manager (ie. Extn450)
a. Add password on front page and on Telephony -> supervisor login (ie: 1234)
b. Turn off Voice Mail
2) Configure an extension as SIP with base extension you configured and save to IP Office
3) Plug in the B179, once it powers up:
a. Press the menu key and navigate to status -> network and get the DHCP IP address
4) Open a browser and navigate to this address. Select ‘admin’ from the drop down box and password 1234
5) Go to settings -> SIP
a. Enter the extension number (ie: 450) in the 3 user name fields
b. Enter the IP Office address in the Registrar and Proxy address
c. Enter the password (ie: 1234) in the password box.
d. Leave all other settings default
e. Click apply.
6) Phone will register and be operational.
Those are great instructions. One thing to note. The account name field is what displays on the phone. You can put anything in there. I put in the users name and extension.
The web interface was inconsistent. Sometimes I could connect to it. Sometimes not.
One thing that was an issue was the switch port vlans. It would not work for me if I plugged it into a port that had the data and voice vlan. It would only work if the port had voice vlan only.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.