[b]Terminal won't time out[/b]

[galley]

Hi All,

I have an Option 11C:

MAIN CAB
VERSION 2111
RELEASE 25
ISSUE 40 B +

The problem is that the direct connect terminal does not time out after 15 or 20 minutes. If the customer goes in to make a name change and forgets to log off, I can't access the maint loads remotely (like LD 02). There is no LOUT prompt in load 17 under password.

Any suggestions???

 

[Johnthephoneguy]

Use the forc command to kick them out and then you can access your loads

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[galley]

How?

 

[loop13]

First log in and the write forc x
x= tty number you want to force log out

 

[galley]

What load is this done in?

 

[loop13]

NO LOAD

 

[galley]

I logged in and wrote forc 2...it did not force out the terminal?? What else can I try....I thought the terminals should always time out automatically.

 

[Johnthephoneguy]

go to your login paramaters and under the options make sure you have force allowed in your login, then the command will work for you.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[galley]

John,

How do I get to the login parameters?

 

[galley]

I got it fixed!

Thanks to all!!!

 

[normatech]

Referred to as the Overlay Loader.
Just login then at the,
> (Type in SEND xx = tty port) system reponds with
SEND MSG (Type message up to 80 charactors) return

Other Commands;
WHO
SEND ALL

Just got a call in about these COMMANDS, maybe this will help somebody else.
There are more, you can find this INFO in NTP PO842843 X11 maintenance programs.

 

[phonz1]

also, to FORC, you have to login as level 2