sizbut thanks for the quick reply. When I look at the K1xxSupgrade file it is running the following query:
# K165_K175_SW
SET APPNAME K1xx_SIP-R2_0_1_0_5084.tar
GOTO GETSET
# K155_SW
SET APPNAME K1xx_SIP-R2_0_1_0_5584.tar
I finally found the link to the 2_0_1 firmware by going to the document: IP Office: Vantage using 11.0 FP4 failing with Equinox, There is a link in this document for the 2.0.1 firmware in a zip file.
I clicked the Link immediately below the section: "Solution
Make sure to use Vantage 2.0.1 and Equinox 3.5.5
Firmware files are available from support.avaya.com | Downloads."
hi opie the phoneman , do you happen to still have the link you mention in the doc?
i've found the reference to the fault you highligt, but the link no longer works
I've used HFS and has worked well for me. I read that version 2.1 will support call park and pick up but has been removed from the Avaya support site...
Ill throw in some info on getting my Vantage working remotely. These strings were added to my 46xxspecials.txt. Note there are two sets, one for Equinox and another for Vantage. the IP address in SET USER_STORE... is the external address (WAN) of my IP Office.
Also, at my remote office, I setup hfs.exe on my laptop with a static address. I entered my laptop address in the http server in IPO > System. This HTTP server MUST be something other than the IPO for Vantage to work. The 46xx....txt files go into IPO, and the big .bin files go into hfs on the laptop.
SysMon helped me tremendously. Enabled FileSys in tracing options and look to see what the Vantage is looking for and move the files until you get it right.
At the bottom is the command for the background image, I haven't played with that yet.
Hope this helps someone in the future.
*** EXAMPLE OF 46xxspecials ***
** EQUINOX **
SET ADMIN_PASSWORD xxxxxxxxx
USER_INSTALL_APPS_GOOGLE_PLAY_STORE 1
SET USER_STORE_URI "
SET VANTAGE_SNTP_SERVER 0.pool.ntp.org
SET TIMEZONE America/New_York
SET APPNAME K1xx_SIP-R2_1_0_1_6038.tar
SET ACTIVE_CSDK_BASED_PHONE_APP "com.avaya.android.flare"
SET PUSH_APPLICATION "equinox-gaRelease-3.6.4.40.FA-RELEASE29-BUILD.22.apk"
** VANTAGE BASIC **
SET ADMIN_PASSWORD xxxxxxxxxx
USER_INSTALL_APPS_GOOGLE_PLAY_STORE 1
SET USER_STORE_URI "
SET VANTAGE_SNTP_SERVER 0.pool.ntp.org
SET TIMEZONE America/New_York
SET APPNAME K1xx_SIP-R2_1_0_1_6038.tar
SET ACTIVE_CSDK_BASED_PHONE_APP "com.avaya.android.vantage.basic"
SET PUSH_APPLICATION VantageConnect_2.1.0.0.0101_260519_7e7cd32.apk
***
ThePhoneMn: Do you still have this firmware package? I can't find it anywhere. Also, did you have any luck getting the video feature to work? We have IP Video turned on on the trunks, etc. but keep getting error messages stating that "Escalation to Video Failed".
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.