Avaya Signalling Server Service List

[Shivrohi]

Hi Everyone

Thanks all in Advance !!

I am new to Avaya so I would appreciate your help. I was looking for the list of services on Signalling Server but I could not find any command to populate it.

Also, how can I check the status of the signalling server as attached image.


Regards

 

[bignose21]

guess it would depend on the release but on 7.6 servicesStatusShow gives the status of TPS/VTRK/sets registered. Its a Linux box so other linux commands work (like "top" for example) depends what you are looking for.
the image you attached looks like it was done in the callserver, LD 117 "stat ss" or depending on whats connected you may see the same or more with "stat serv

 

[janaya]

What you are looking at is a good way to check the sig server status. As bignose21 stated, you can do this from LD 117, as you did in your pic.

All IP addresses have been changed to protect their identity.


>ld 117
OAM000

=> stat ss

NODE ELANIP LDR SRV PBXLINK HOSTNAME
ID STATE
5555 10.1.1.1 NO HP DL360G8 LINK UP follower_SS.widget.com
APPS: LTPS
PBXLINK DATE: 08/05/2020
PBXLINK TIME: 12:24:58
CONNECTID: 67f2ef0
Sets: [reg - 00361] [busy - 00002] [dvla - 00000]
Type: HP DL360G8
Location: 0 0 0
Product Eng.Code: NTDXXXXXXX
Serial Number: USE6022H7L
Memory Size: 16384 MB
Disk Size 279 GB

You could check from the sig server

[johnan@follower_ss~]$ pbxLinkShow

=== PBX ===
Active Call Server type = CS 1000E
Active Call Server S/W Release = 765P
Supported Features: CorpDir UserKeyLabel VirtualOffice UseCSPwd 2001P2 2004P2 2002P2 PD/RL/CL QoS Monitoring NAT Traversal ACF IP ACD 1150 NextGen Phones IP Phones 1200
Call Server Main: ip = 10.2.2.2, ConnectID = 0x9860e20, BroadcastID = 0x98603b8, Link is up
Call Server Redundant: ip = 10.2.2.3, ConnectID = 0x9861888, BroadcastID = 0x0, Link is in TBD state
Call Server Signaling Port = 15000
Call Server Broadcast Port = 15001
Broadcast PortID = 0x9860298
RUDP portID = 0x9860328
Tcp Link state = up
Tcp Signaling Port: 15000
Tcp socket fd: 22
Tcp msgs sent: 18143565
Tcp msgs recd: 233692932
[johnan@stl-5555-flwr1 ~]$

What else are you looking for? Now just because the link is up on both sides, not all services can be up. We have issues with SIP Line where all shows up, but our B179 phones don't work. We end up having to restart the Signaling Server to get them to re-register.

Now to check the services:

Again, as bignose21 states you can do $servciesStatusShow, but that sometimes doesn't give you the information you need. You can drill down to the specific service you are trying to check

[johnan@follower_ss ~]$ tpsShow

=== TPS ===
Node ID : 5555
Is master : 0
Up time : 160 days, 12 hours, 59 mins, 14 secs (13870754 secs)
Server Type : Signaling Server
Platform : HP DL360G8
TPS Service : Yes
IP TLAN : 10..3.3.3
IP ELAN : 10..3.3.3
ELAN Link : Up
Sets Connected: 362 (DTLS: 0 USec: 0 Insecure: 362)
Sets Reserved: 0
[johnan@follower_ss ~]$ vtrkShow

=== VTRK ===


---------------------------
VTRK Summary

---------------------------
VTRK status : Standby
Master status : Off
VTRK REG Node : 5555
Protocol : SIP SIPL
D-Channel :
Customer :
Channels Idle : 0
Channels Busy : 0
Channels Mbsy : 0
Channels Pend : 0
Channels Dsbl : 0
Channels Ukwn : 0
Channels Total: 0
Chid ranges : 0 to 0

VTRK State = Standby
---------------------------

VTRK Status = Enabled
---------------------------

[johnan@follower_ss ~]$

But post a little more specific on what you are looking to monitor.

Hope this helps.



John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/