Avaya One X10 Analog terminal adapter

[JDClampet]

Trying to setup a Avaya One X10 analog terminal adapter to dial 9, then access the TELCO that is in the Avaya one X gateway. I can call another extension with it when I connect my analog device but I can't access the Telco dial tone.
Can someone help me here on how to set it up?

Thanks

 

[plotkiller]

Are you just using the One X phones to try to dial out, or are you connecting it to an IP Office through an analog ext. port?

 

[JDClampet]

Just on the one X Phone system.


thanks

 

[puregold]

Ive got one here, but to be honest it does my head in so much i cannot even bring myself to look at it.

ACE - Avaya Certified Expert
ACI - Avaya Certified Instructor

 

[amriddle01]

Yes, put all the One x stuff in a box cover it lighter fluid then set in on fire. That'll sort it out, and will probably actually work better too!! lol

 

[JDClampet]

Ok,
I figured it out.....in the A10 setup window, you have to configure your SIP trunk even though you don't have SIP trunks with your service provider.

 

[IPOfficeIreland]

no jd, seriously take advice, don't set up sip trunks, get the petrol and a box of matches. tell the customer this is how it should work, they will think you are mad and you'll never hear from them again..

 

[intrigrant]

If you ever installed a Avaya INDeX then you gave the same advice regarding IP Office when it was just released ( version 1.2 ).....
Be positive, tell Avaya what you think of the product and they will improve it.

NIHIL NOVI SUB SOLE