Avaya J179 Problem with VLAN 2

[Schwenki]

Hi,
Currently we have the problem that the j179 ignore the DHCP options.
The following is configured on the Windows Domain Controller = DHCP Server

In the Data LAN
Scope 242
L2Q=1,L2QVLAN=10,VLANTEST=0

Configuration on the voice network
Via DHCP Helper point to the DHCP Server

MCIPADD=xxx.xxx.xxx.xxx,HTTPSRVR=xxx.xxx.xxx.xxx,VLANTEST=0

The devices remain stuck in the PC network.
Strangely, everything works as it should with 96xx phones ...
Unfortunately, the J100 show nothing at boot time like a 96xx...

Br
Thomas

 

[Schwenki]

Hi,

i`m again.

we found the issue, it was the configuration of the Cisco Switch.
The Voice VLAN has been on Trunk, so the J179 seems to have a problem. The 9611 strangely not.