Avaya J179 H323 FW on IPO R9

[OhashiManoel]

Hello beautiful people,
Have any of you ever succeeded into connecting J179 phone with H323 signaling to the IP500v1 CU, loaded with IPO R9?

 

[IPOTS]

Check out this thread....

https://www.tek-tips.com/viewthread.cfm?qid=1806086

Stated R10 as minimum release for use as H323 for J179's

 

[Shaun E]

It might work, as they identify as a 9611G which are supported from 8.0 onwards - but I've never tested it.

@IPOTS - that's my original thread and I've been running J179 (and J169s) since then on 9.1. The only issue was that only the first page on the JEM24 module worked. I've only just upgraded to 11.1 so they're now running SIP.